If you have ever booked a curly cut and seen a two-hour slot and a higher price than a standard cut and blow-dry, the difference is mostly time. Depending on the service, curls may be cut dry or shaped curl by curl, washed and conditioned, then dried with a diffuser or under a hood. The consultation, shaping and finish can keep the appointment running longer.
One part of that cost rarely gets mentioned: energy. We modelled the electricity and hot water behind two example appointments, using published equipment wattages and official business energy prices in the UK and US. Our treatment-inclusive curly appointment uses about 1.7 times the total energy of the standard appointment. In the UK example, that costs about 87p, against 46p for a standard cut and blow-dry. Energy adds to the bill, but it cannot explain a large curly-cut premium on its own.
Where the energy goes in a curly appointment
The standard cut and blow-dry in our model is one wash and 20 minutes with a professional handheld dryer. The curly example adds more drying and a conditioning treatment:
- Washing: 1.5 washes’ worth of warm water, allowing for an additional conditioning rinse. Each wash is modelled at 16 US gallons, about 61 litres. This is an equipment-sizing allowance, not a measured average for today’s salons.
- Diffusing: 30 minutes with a 2,150-watt professional dryer, against 20 minutes for the standard blow-dry.
- Hood time: 20 minutes under a 1,100-watt hood dryer to dry the hair without continual handling.
- Steam: 15 minutes with a 620-watt hair steamer during an optional conditioning treatment.
This is one illustrative service, not a checklist every curl appointment needs. A stylist might use a diffuser or a hood, rather than both, and steaming is not essential to a curly cut.
Add it up and this curly appointment uses about 5.1 kilowatt-hours (kWh), against 3.0 kWh for the standard service. Electricity alone goes from 0.7 kWh to 1.6 kWh, about 2.2 times as much. The diffuser is the largest electrical load in the curly example. Heating the wash water accounts for most of the remaining energy, supplied here by a gas water heater.
These are estimates, not meter readings. Rated power is not necessarily the power drawn throughout a session, especially at lower settings. Hair length, density, starting moisture, rinse flow and drying method can all change the result.
What that energy costs a salon in the UK
Official DESNZ business energy figures show a substantial rise since 2019. For the very small non-domestic consumer bands used here, electricity increased from 16.7p per kWh in 2019 to 36.7p using the mean of the first two quarters of 2026, about 120%. Gas went from 4.5p to 8.3p, about 83%. These figures include the Climate Change Levy and exclude VAT.
| Appointment (UK) | 2019 | 2026, first-half estimate |
|---|---|---|
| Standard cut and blow-dry | About 22p | About 46p |
| Curly cut, style and treatment | About 42p | About 87p |
| Extra cost of the curly example | About 20p | About 42p |
Per appointment, that is less than the price of a coffee. Across 1,000 appointments matching the curly model, it comes to about £870, against £420 at 2019 prices. Lighting, room heating and other salon equipment add separate costs.
For salon owners, the practical point is that appointment-related energy use is predictable enough to budget for. Contract terms can also affect the bill. Green Light Consultancy Group’s information on business energy for salons is a starting point for comparing energy arrangements before renewal. Check unit rates, standing charges and contract terms against the salon’s actual annual usage.
What it costs in the US
The same model costs less to power at US national commercial averages. The US Energy Information Administration reports commercial electricity at 10.68 cents per kWh in 2019 and 14.04 cents for January to August 2026, a rise of about 31%. The commercial gas prices used here equate to roughly 2.6 and 4.1 cents per kWh.
| Appointment (US) | 2019 | 2026, available-period estimate |
|---|---|---|
| Standard cut and blow-dry | About 14 cents | About 20 cents |
| Curly cut, style and treatment | About 26 cents | About 37 cents |
That is an increase of about 40% for the curly example, compared with roughly doubling in the UK. These are national commercial averages, not salon-specific quotes. A salon’s location and contract can produce a different bill.
What this means if you have curls
Energy is a small part of why a curly appointment costs more. The consultation, stylist’s skill, hands-on work and appointment length matter much more to the final price.
Drying time still has a cost beyond electricity. A long diffuse requires the stylist’s attention. Hood drying can leave their hands free, although the chair and equipment remain occupied. Ask whether a cut-only or shorter maintenance appointment is available if you do not need the full wash-and-style service.
A hood is not automatically the more power-hungry option. The 1,100-watt hood in this model uses about half as much electricity per minute as the 2,150-watt handheld dryer at rated power. Total use depends on how long each runs. A hood is not automatically gentler either: temperature, distance and exposure time still matter.

Washing matters more than you might think. Water heating accounts for about two-thirds of the total energy in this model. That share depends heavily on the assumed water allowance and gas-heater setup. It does not mean your hair needs an extra wash or a deep-conditioning treatment at every appointment.
Before booking, ask what the quote includes: consultation, dry shaping, washing, styling and any optional treatment. Compare the same services, rather than assuming every “curly cut” means the same appointment.
At home, air-drying partway before diffusing may reduce powered drying time. Lower heat can take longer, so choose a comfortable setting rather than judging efficiency by wattage alone. Our guide to choosing a hair dryer explains what to consider when comparing tools.
How we worked it out
For each appliance, energy in kWh equals power in kW multiplied by running time in hours. The examples use the Parlux 385 PowerLight’s 2,150-watt rating, a 1,100-watt hood-dryer assumption and the Melissa steamer’s 620-watt rating. These are example inputs, not measurements of every salon.
The water allowance comes from an A. O. Smith beauty-shop sizing guide. We used 16 US gallons per wash, water warmed from an assumed 10°C to 38°C, and 85% gas-heater efficiency. This gives about 2.32 kWh of gas per wash. Actual rinse volume and inlet temperature can make a substantial difference.
UK 2026 rates are the simple mean of DESNZ’s first- and second-quarter very small consumer-band prices. US electricity uses EIA’s January–August year-to-date figure; commercial gas prices use monthly means for 2019 and January–August 2026, converted at approximately 304 kWh per thousand cubic feet. The periods differ because full-year 2026 data are not yet available.
Costs are rounded after calculation. The UK published rates are fully delivered averages, so fixed-charge effects are already reflected; no separate standing charge is added. VAT, lighting and room heating are outside this model. These are illustrative allocations of energy costs, not official appointment statistics or exact marginal costs.




